Morphological study of thin films: Simulation and experimental insights using horizontal visibility graph

We studied the morphological nature of various thin films such as silicon carbide (SiC), diamond (C), germanium (Ge), and gallium nitride (GaN) on silicon substrate Si(100) using the pulsed laser deposition (PLD) method and Monte Carlo simulation. We, for the first time, systematically employed the visibility algorithm graph to meticulously study the morphological features of various PLD grown thin films. These thin-film morphologies are investigated using random distribution, Gaussian distribution, patterned heights, etc. The nature of the interfacial height of individual surfaces is examined by a horizontal visibility graph (HVG). It demonstrates that the continuous interfacial height of the silicon carbide, diamond, germanium, and gallium nitride films are attributed to random distribution and Gaussian distribution in thin films. However, discrete peaks are obtained in the brush and step-like morphology of germanium thin films. Further, we have experimentally verified the morphological nature of simulated silicon carbide, diamond, germanium, and gallium nitride thin films were grown on Si(100) substrate by pulsed laser deposition (PLD) at elevated temperature. Various characterization techniques have been used to study the morphological, and electrical properties which confirmed the different nature of the deposited films on the Silicon substrate. Decent hysteresis behavior has been confirmed by current-voltage (IV) measurement in all the four deposited films. The highest current has been measured for GaN at ～60 nA and the lowest current in SiC at ～30 nA level which is quite low comparing with the expected signal level (μA). The HVG technique is suitable to understand surface features of thin films which are substantially advantageous for the energy devices, detectors, optoelectronic devices operating at high temperatures.     

高耸桥墩保护性爆破拆除关键技术

为解决高耸钢砼桥墩上部倾斜导致的工程质量不合格问题,采用保护性控制爆破将上部倾斜部分钢砼桥墩予以拆除,同时保留下部未偏斜部分桥墩不受破坏。采用开设组合形状切口,预开定向窗、导向窗;设置组合高差卸荷槽,预伤钢筋弱化抗压抗拉能力为关键措施的控制爆破方案。方案实施取得了十分满意的效果,上部拟拆除部分桥墩顺利倾倒下坠,下部保留部分桥墩完好无损。采用保护性控制爆破技术能高效、安全地解决类似高耸钢砼桥墩(构筑物)部分拆除、部分保留利用的问题,并能取得可观的经济、社会效益。     

箱形横梁的水压爆破拆除

某电影院大厅内钢筋混凝土箱形横梁长25m,断面尺寸1 6m×2 4m,用水压爆破拆除。通过梁的受力分析得知,为避免横梁的挠度过大,在吊梁拆除后必须另补支撑,以确保水压爆破正常进行。文中对水压爆破炸药用量的计算公式进行了比较和简评。在参考计算结果和考虑厅内环境的基础上,并结合以往水压爆破工程的经验,确定了合理、有效的药量,保证了主体结构的绝对安全。     

基于分形理论的黄河内蒙古段河势演变特征及其与凌汛灾害关联研究

寒区河道凌汛灾害河势“弯道效应”的量化评估十分重要。基于分形理论提出河道横断面-纵剖面-平面多维度河势分形维数计算方法及其物理机制，并探讨黄河内蒙古段不同维度河势演变分形特征及其与凌汛灾害的关联关系。结果表明，黄河内蒙古段不同维度河势均具有多尺度自相似分形特征，且具有多年记忆周期的长程相关性；冰坝（严重性冰塞）发生频次与河道主槽弯曲分形维数呈正相关指数型函数关系，与河相系数、深泓点高程和河段平均底坡分形维数负相关，与水深-面积分形维数正相关，总体表明冰坝灾害更易发生于主槽偏移摆动大、蜿蜒曲折、河湾发育程度高的宽浅型弯曲河道，研究成果可为凌汛期冰塞冰坝灾害易发河段诊断及预测提供重要理论依据。     

高面板坝全寿命周期变形控制方法及应用

高面板坝的变形对面板的安全运行有着特别重要的影响，国内外已建的高面板坝工程中，因坝体变形大导致防渗面板挤压破损，坝体渗漏量大的实例较多，不得不降低水库水位进行修复处理，造成较大的经济损失乃至给大坝的长期运行留下安全隐患。通过发生挤压破损的实例分析，发现变形控制缺乏系统性是发生面板挤压破损的主要因素，为预防面板破损，系统提出了“控制坝体总变形，转化有害变形，适应纵向变形”的坝体变形控制方法，并在使用软硬岩混合料筑坝的董箐面板堆石坝中得到的应用，取得了良好效果，该工程运行至今达十余年，未见面板有挤压破损迹象，该方法对建设200 m以上乃至300 m级超高面板坝具有重要借鉴意义。     

Full scale investigation of GCL damage mechanisms in small earth dam retrofit applications under earthquake loading

This paper reports results of full scale testing to further explore potential GCL damage mechanisms in earth dam retrofit applications in seismically active areas; in particular, to a) investigate whether shear displacements could reduce the magnitude of GCL panel overlap during earthquake shaking; b) explore the influence of gravel particles on GCL thickness at localised point of contact; and c) observe the consequences of an accidental exposure of an uncovered GCL to short duration rainfall in terms of moisture content and effects during subsequent compaction. The results of these experiments indicate that even under severe shaking no movements were detected at the GCL panel overlap. Whereas gravel particles were observed to locally reduce the thickness of the GCL to 2.2 mm, no plowing of the particle into the GCL occurred due to a lack of shear displacement at the interface, resulting in no localised internal erosion through the barrier. Furthermore, hydration of GCL panels during construction due to surface wetting was observed to result in a state of hydration less than its post-construction state. These results indicate that although each of the three GCL damage mechanisms cannot be ruled out to ever be relevant in practice, the performance of the GCL retrofitted earth dam tested was satisfactory under even severe Level 2 earthquake shaking, and suggests that the retrofitting of small earth dams with GCLs is a promising strategy to improve their static and seismic resistance.     

新型地锚张弦梁式泥石流格栅坝构件受力的简化计算方法

针对常见泥石流防治结构被冲击破坏的问题，基于“柔性消能”理念，结合张弦梁结构和竖向预应力锚杆技术，提出一种既能改善结构受力性能、增加结构整体抗冲击能力、保证结构安全可靠，又能减小结构构件截面尺寸、节约成本、便于现场施工组装和后期运营维护的新型地锚张弦梁式泥石流格栅坝，并阐述其技术原理。根据泥石流荷载分布和新型地锚张弦梁式泥石流格栅坝的受力特征，给出其简化的内力计算方法；并利用SAP2000建立新结构有限元模型，分析了结构的整体受力，验证了构件简化计算方法的合理性；结合Python语言和Qt De? signer软件开发了相应的设计计算软件，对新型地锚张弦梁式泥石流格栅坝的内力进行求解。结果表明：提出的新结构抗冲击性能好，构件受力均匀；以后设计中应关注竖杆的剪切脆性破坏和立柱偏心受力情况，保证结构安全；变形协调仅使底层张弦梁与竖杆内力偏大，实际工程应用时，应着重验算底层构件，防止其破坏；文中提出的简化计算方法能较准确的反映结构的受力特性，具有一定的合理性，研究可为新型地锚张弦梁式泥石流格栅坝的设计计算和推广应用提供理论依据和技术支持。     

A new experimental simulation method for the development of non-renewable hydrogen energy—Oil and gas resources

At present, the proportion of tight oil in non-renewable hydrogen energy is increasing. According to an initial exploration and attemptable practice on the exploration of tight oil, it is found that the cost can be controlled effectively and positive effects are achieved. But this technique cannot make sure the proppants filled uniformly in the long fracture. Several researches on the proppants migration experiment devices and factors influencing on proppant setting are reviewed and a new set of experimental device to simulate the laws of proppants setting in long fracture is developed. This device can simulate the main factors influencing proppants setting performance. It analyzes several factors such as wall filtration, construction displacement, sand concentration, proppant size and density, viscosity of fracturing fluid is used to rank the influencing degree of every factor. Considering the effects of mutual interference between proppants, width of fracture, rough fracture surface and fracture surface filtration during the proppants setting progress, the mathematical model of proppant setting is modified by adding sand concentration correction factor, wall effect correction factor and filtration correction factor. The experimental data verify the accuracy of the settlement model is established using the data getting from experiment.     

平原地区城市湖泊防洪与景观功能协调研究——以枝江市金湖为例

为了使城市湖泊尽可能滞蓄雨洪、发挥景观功能、打造良好的居民"亲水空间",以枝江市金湖为例,根据金湖主要泄洪渠道的实际情况,利用Mike 21模型模拟计算汛限水位值,按照景观水位确定大、小洪水工况下合理的水位。在此基础上,提出传统的静态景观水位与改进的动态景观水位两种方案。结果表明:以50年一遇、30年一遇为代表的大洪水工况下合理景观水位为40.7 m,以20年一遇、10年一遇为代表的小洪水工况合理景观水位为41.3 m;静态方案采用50年一遇洪水计算结果为标准执行,将40.7 m作为金湖固定的景观水位;动态方案水位可在41.3~40.7 m之间波动;金湖适宜采用动态景观水位运行方案,水位可在40.7~41.3 m之间波动;根据短期预报及历史监测资料分析后合理调度,将41.3 m作为金湖常水位,确定预测洪水大小后调整水位迎战洪水。据此,可在充分利用水资源的同时有效协调景观高水位需求与防洪之间的矛盾。     

阶梯溢流坝面坡度对一体化消能工水力特性的影响

为探求高水头、大单宽流量下坝面坡度对一体化消能工水力特性的影响,以阿海水电站为原型,采用三维k-ε双方程紊流模型,引入水气两相流VOF计算方法,利用几何重建格式来迭代生成自由水面,对1∶0.80、1∶0.75、1∶0.65三种阶梯面坡比进行数值模拟研究。结果表明:①最大负压值均位于首级阶梯立面凸角下1/4附近,并随坡度增加而增大。坡度为56.98°时,最大负压值为61.02 kPa,超过了6×9.81 kPa。②水流空化数在宽尾墩水舌出口位置出现最小值,空化数随坡度变陡而减小。坡度为56.98°时,空化数最小为0.358。坡度为51.34°时,空化数最大,为0.381。③随着阶梯溢流坝坝面坡度变缓,消力池最大临底流速增大。当坡度为51.34°时,消力池最大临底流速最大,达到26.84 m/s,超过了25 m/s,易发生冲磨破坏。当坡度为56.98°时,消力池最大临底流速最小,为24.00 m/s。消力池尾坎前最大临底流速随坡度增加而减小,坡度为56.98°时最小,为9.63 m/s;坡度为51.34°时,消力池尾坎前最大临底流速最大,为9.96 m/s。④坡度的变化对一体化消能工消能率的影响不大,坡度从51.34°增加到56.98°,消能率只提升0.15%。